Hỗ trợ trực tuyến

Hỗ trợ trực tuyến qua yahoo My status
Sales 1
Hỗ trợ trực tuyến qua yahoo My status
sales 3
Hỗ trợ trực tuyến qua yahoo My status
Sales 2
Hỗ trợ trực tuyến qua yahoo My status
sales 4
Hỗ trợ trực tuyến qua yahoo My status
Hỗ trợ trực tuyến qua yahoo My status
Tel: (84-028) 39.575.698
Fax: (84-028) 39.575.697

Công nghệ

Linh kiện điện tử

Thiết bị thí nghiệm

Liên kết website

Liên kết website

Thống kê truy cập

  • Online: 17
  • Số lượt truy cập: 931826

Tin tức nổi bật

Chi tiết sản phẩm
  • Robot côn trùng - Kilobot
  • Xuất xứ: Liên hệ
  • Giá: Liên hệ
  • Tình trạng: Liên hệ
  • Lượt xem: 3506

Introduction to Kilobot 
Kilobot is a low-cost, easy-to-use robotic system for advancing development of “swarms” of robots that can be programmed to perform useful functions by coordinating interactions among many individuals. These swarms are inspired by social insects, such as ant colonies, that can efficiently search for and find food sources in large complex environments, collectively transport large objects, and coordinate the building of nests and bridges in such environments. 
Following this inspiration from nature, robot swarms might one day tunnel through rubble to find survivors, monitor the environment and remove contaminants, assist dwindling bee populations in pollinating crops, and self-assemble to form support structures in collapsed buildings. The Kilobot is designed to provide scientists with a physical testbed for advancing the understanding of collective behavior and realizing its potential to deliver solutions for a wide range of challenges.

  • Low cost
  • Small, only 33mm of diameter
  • Fine motor controlling (255 differents power levels)
  • The Kilobot can communicate with neighbors up to 7 cm.
  • Neighbor-to-neighbor distance sensing
  • Ambient light sensing
  • RGB led
  • Rechargable and amovible battery
  • Easy to manipulate, with the Kilobot controller you can program and control hundreds of Kilobot at one time.


ElementsTechnical Information


ATmega 328 (8bit @ 8MHz)


32 KB Flash used for both user program and bootloader, 1KB EEPROM for storing calibration values and other non-volatile data and 2KB SRAM


Rechargeable Li-Ion 3.7V, for a 3 months autonomy in sleep mode.
Each Kilobot has a built-in charger, which charges the onboard battery when +6 volts is applied to any of the legs, and GND is applied to the charging tab.


Kilobot charger (optional)


Kilobots can communicate with neighbors up to 7 cm away by reflecting infrared (IR) light off the ground surface.


When receiving a message, distance to the transmitting Kilobot can be determined using received signal strength. The brightness of the ambient light shining on a Kilobot can be detected.


Each Kilobot has 2 vibration motors, which are independently controllable, allowing for differential drive of the robot. Each motor can be set to 255 different power levels.


Each Kilobot has a red/green/blue (RGB) LED pointed upward, and each color has 3 levels of brightness control.


The diameter is 33 mm and the height is 34mm (including the legs)


The Kilobot Controller software is available for controlling the controller board, sending program files to the robots and controlling them.


For programming, the open source development software WinAVR combinated with AvrStudio from Amtel gives a C programming enviromnent. An API with basic functions such as motor speed, led control, distance measurement,... is available and some examples are provided.


A serial output header is available on each robot for debugging via computer terminal.

Simulator V-REP, realistic 3D Simulator and robot programming (included for education), with Kilobot model.
Đối tác toàn cầu
  • 3B Scientific
  • Arduino
  • MikroElektronika
  • PHPoC
  • MikroeElektronika